Madaxemans 10mm & Real World Photo Gallery

Photos from museums, and from my 10mm wargaming collection

Home
Login

The 10mm & Real World Museums Photo Directory - helping you choose the best 10mm tanks, or dig out real cammo schemes from tanks and other military vehicles in museums and shows around the world. You can also search the directory by manufacturer, army or keyword

Anyone can rate the photos just by clicking on the stars beneath each photo. Ratings use a scale of 0-5 where 5 = excellent and 0 = terrible.

Last additions

Khalid export Chieftain292 viewsJordanian with the running gear of the Challenger 1. Basically this was a transition vehicle from the Chieftain to the Shir 2 which had been intended for Iran but was subsequently cancelled. The Shir 2 tanks became Challenger 1 tanks after reworking at ROF Leeds. The vehicle chassis comprised the front half of a Chieftain Hull, Chieftain running gear and the rear of a 4030/2 Chassis (Sloping Hull). This allowed the fitment in the engine bay of a Rolls-Royce CV8 engineMay 19, 2013

TOGII355 viewsThe Tank, Heavy, TOG II was a prototype British tank design produced in the early part of the Second World War in case the battlefields of northern France turned into a morass of mud, trenches and craters as had happened during the First World War.
A development of the TOG 1 design, only a single prototype was built before the project was dropped.May 19, 2013

Crusader III336 viewsWW2 Desert warfare section - The Tank, Cruiser, Mk VI or A15 Crusader was one of the primary British cruiser tanks of the early part Second World War and perhaps the most important British tank of the North African Campaign. The Crusader's mobility made it a favourite of British tank crews and its Ordnance QF 6 pounder main gun made it more than a match for the early Panzer III and Panzer IV tanks it faced in combat. Retained in service because of delays with its replacement, by late 1942 the lack of armament upgrade combined with the presence of Tiger I Tanks among the Afrika Korps and overheating problems caused by the high temperatures of the desert, led to the design being phased out in favour of the new US-supplied Sherman medium tankMay 19, 2013

M103A2274 viewsThe M103 heavy tank served the United States Army and the US Marines during the Cold War. Until the development of the M1 Abrams in the mid-1970s, it was the heaviest and most heavily armed tank in US service. The M103 was manufactured at the Detroit Arsenal Tank Plant and the first units were accepted in 1957. The last M103s were withdrawn from service in 1974.May 19, 2013

T55A289 viewsDuring the 1950s, the T-55 remained a significantly smaller and lighter tank than its NATO contemporaries—the U.S. M48 Patton and the British Centurion—while maintaining good firepower and reliability but light armor. The 100-mm D-10T tank gun had a larger bore than its Western counterparts.May 19, 2013

AV7 W1 German tank306 viewsThe A7V was a tank introduced by Germany in 1918, near the end of World War I. One hundred vehicles were ordered during the spring of 1918, but only 20 were delivered. They were used in action from March to October of that year, and were the only tanks produced by Germany in World War I to be used in operationsMay 19, 2013

Marmon Herrington Mk VI305 viewsPowered by two Mercury V8 engines with a eight-wheel drive steered on the front and rear wheels. Two prototypes were built, one with a 2 pounder and other with a 6 pounder gun in an open-topped three-man turret with electric powered traverse and protected by 10 to 30 mm of sloped armour. Additional armament consisted of 2 or 3 machine guns. The two-pounder equipped version was sent to the UK for assessment, the transmission proved unreliableMay 19, 2013

Italian L3 Lf flamethrower flame tank 302 viewsThe "L3 Lf" flamethower (lancia fiamme) flame tank was another variant of the L3 tankette. Development began in 1935. The flamethrower nozzle replaced one of the machine guns, and the flame fuel was carried in an armored 500L (133 gallons) fuel trailer towed by the vehicle. Later versions had the fuel carried in a box-shaped tank mounted above the L3's engine compartment. The vehicle weighed 5 tonnes. The L3 Lf saw action in Abyssinia, Spain, France, the Balkans, North Africa, and Italian East Africa. From 1936 each CV/L3 company had a single L3 Lf platoonMay 19, 2013

Mk II Valentine280 viewsUntil the Valentine name adopted in June 1941[10] known as "Tank, Infantry, Mark III" This model used AEC A190 131 hp 6-cylinder diesel engine. In order to increase its range, an auxiliary external fuel tank was installed to the left of the engine compartment.May 19, 2013

Italian L3 Lf flamethrower flame tank 306 viewsThe "L3 Lf" flamethower (lancia fiamme) flame tank was another variant of the L3 tankette. Development began in 1935. The flamethrower nozzle replaced one of the machine guns, and the flame fuel was carried in an armored 500L (133 gallons) fuel trailer towed by the vehicle. Later versions had the fuel carried in a box-shaped tank mounted above the L3's engine compartment. The vehicle weighed 5 tonnes. The L3 Lf saw action in Abyssinia, Spain, France, the Balkans, North Africa, and Italian East Africa. From 1936 each CV/L3 company had a single L3 Lf platoon.May 19, 2013

3435 files on 344 page(s)

131

Madaxemans 10mm & Real World Photo Gallery

Photos from museums, and from my 10mm wargaming collection

Visit Madaxeman on

Podcasts to download from Madaxeman.com