Madaxemans 10mm & Real World Photo Gallery

Photos from museums, and from my 10mm wargaming collection

Home
Login

The 10mm & Real World Museums Photo Directory - helping you choose the best 10mm tanks, or dig out real cammo schemes from tanks and other military vehicles in museums and shows around the world. You can also search the directory by manufacturer, army or keyword

Anyone can rate the photos just by clicking on the stars beneath each photo. Ratings use a scale of 0-5 where 5 = excellent and 0 = terrible.

Home > Museums and Shows > Bovington

Bovington

King Tiger "Porsche" Turret99 viewsThe initial King Tiger design is sometimes misleadingly called the "Porsche" turret due to the belief that it was designed by Porsche for their prototype; in fact it was the initial Krupp design for both prototypes. This turret had a rounded front and steeply sloped sides, with a difficult-to-manufacture curved bulge on the turret's left side to accommodate the commander's cupola. Fifty early turrets were mounted to Henschel's hull and used in action.

(0 votes)

King Tiger "Porsche" Turret98 viewsUnlike in this one, the more common "production" turret, sometimes called the "Henschel" turret, was simplified with a significantly thicker flat face, no shot trap (created by the curved face of the initial-type turret), and less-steeply sloped sides, which prevented the need for a bulge for the commander's cupola

(0 votes)

M-22 Locust87 viewsThe Light Tank (Airborne) M22 or Locust was an American-designed airmobile light tank which was produced during World War II. The Locust began development in 1941 after the British War Office requested that the American government design a purpose-built airborne light tank which could be transported by glider into battle to support British airborne forces. The War Office had originally selected the Light Tank Mark VII Tetrarch light tank for use by the airborne forces, but it had not been designed with that exact purpose in mind so the War Office believed that a purpose-built tank would be required to replace it

(0 votes)

RAM Kangaroo87 viewsA Kangaroo was a World War II Commonwealth or British armoured personnel carrier (APC), created by conversion of a tank chassis. Created as an expedient measure by the Canadian Army, the Kangaroos were so successful that they were soon being used by British forces as well. Their ability to manoeuvre in the field with the tanks was a major advantage over earlier designs, and led to the dedicated APC designs that were introduced by almost all armies immediately after the war.

(0 votes)

Goliath84 viewsThe Goliath tracked mine - complete German name: Leichter Ladungsträger Goliath (Sd.Kfz. 302/303a/303b) - was a remote controlled German-engineered demolition vehicle, also known as the beetle tank Employed by the Wehrmacht during World War II, this caterpillar-tracked vehicle was approximately 4 feet (1.2 m) long, 2 feet (0.61 m) wide, and 1 foot (0.30 m) tall. It carried 75–100 kilograms (170–220 lb) of high explosives and was intended to be used for multiple purposes, such as destroying tanks, disrupting dense infantry formations, and demolition of buildings and bridges.

(0 votes)

King Tiger 91 viewsThe Tiger II combined the thick armor of the Tiger I with the sloped armor used on the Panther medium tank. The tank weighed almost seventy metric tons, was protected by 100 to 180 mm (3.9 to 7.1 in) of armor to the front, and was armed with the long barreled 8.8 cm Kampfwagenkanone 43 L/71 gun.

(0 votes)

M8 Greyhound85 viewsThe M8 Light Armored Car was a 6x6 armored car produced by the Ford Motor Company during World War II. It was used by the U.S. and British troops in Europe and the Far East until the end of the war. The vehicle was widely exported and as of 2006 still remains in service with some third world countries

(0 votes)

M10 Tank Destroyer85 viewsThe M10 tank destroyer, formally 3-inch Gun Motor Carriage, M10 was a United States tank destroyer of World War II based on the chassis of the M4 Sherman tank. It was numerically the most important U.S. tank destroyer of World War II and combined a reasonably potent anti-tank weapon with a turreted platform (unlike the previous M3 GMC, whose gun was capable of only limited traverse). Despite the introduction of more-powerful types as replacements, it remained in service until the end of the war. Some of those replacements were in fact modified and/or rebuilt from the M10 itself.

(0 votes)

M26 Peshing95 viewsThe Pershing was the first operational heavy tank of the US Army; originally designated the T26, the tank ended its service as the M26 Pershing medium tank. Named after General John J. Pershing who led the American Expeditionary Force in Europe in World War I, it was briefly used both in World War II and in the Korean War. Intended as an improvement of the M4 Sherman, the prolonged time of development meant only a small number saw combat in the European theater, most notably the 9th Armored Division's dramatic dash to take the Bridge at Remagen.

(0 votes)

Jagdpanther124 viewshe Jagdpanther (German: "hunting panther") was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war (1944) and saw service on the Eastern and Western fronts. The Jagdpanther combined the very powerful 8.8 cm PaK 43 cannon of the Tiger II and the characteristically excellent armor and suspension of the Panther chassis, although it suffered from the general poor state Germany was in the late part of the war, which resulted in small production numbers, shortage in spare parts and poor crew training.

(0 votes)

270 files on 27 page(s)

Madaxemans 10mm & Real World Photo Gallery

Photos from museums, and from my 10mm wargaming collection

Bovington

Visit Madaxeman on

Podcasts to download from Madaxeman.com